{"id":3731,"date":"2026-11-12T09:52:47","date_gmt":"2026-11-12T01:52:47","guid":{"rendered":"http:\/\/www.coffeevsteaweightloss.com\/blog\/?p=3731"},"modified":"2026-11-12T09:52:47","modified_gmt":"2026-11-12T01:52:47","slug":"what-cooling-is-best-for-mining-rigs-4a3c-f9aa62","status":"publish","type":"post","link":"http:\/\/www.coffeevsteaweightloss.com\/blog\/2026\/11\/12\/what-cooling-is-best-for-mining-rigs-4a3c-f9aa62\/","title":{"rendered":"What cooling is best for mining rigs?"},"content":{"rendered":"<p>Hey everyone, and welcome back to the mine side of things \u2013 as someone who\u2019s been deep in the mining rig game for over a decade, I get asked this question at least three times a day: \u201cWhat cooling is actually best for mining rigs?\u201d It\u2019s not a one-size-fits-all answer, right? You might see random forum takes that claim liquid cooling is the only way, or that air cooling is dead, but let\u2019s cut through the noise. I work with miners every single week \u2013 from hobbyists cranking out rigs in their garage to warehouse guys running 500+ units \u2013 so I\u2019ve seen every cooling setup fail, work, and blow up in the worst possible way. Today, I\u2019m breaking this down like we\u2019re chatting over coffee, no fancy jargon, just real stuff that actually moves the needle on your rig\u2019s lifespan and profits. <a href=\"https:\/\/www.ruisterchem.com\/mining\/\">Mining<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.ruisterchem.com\/uploads\/202022116\/small\/leather-chemicals-msds-sodium-sulphide46493305180.jpg\"><\/p>\n<p>First off, let\u2019s get one thing straight: mining rigs run hot. I\u2019m talking chips pushing 85\u00b0C under load, power supplies screaming for relief, and if you don\u2019t get that heat out fast, you\u2019re looking at thermal throttling, dead GPUs, or even a total unit crash mid-payout. That\u2019s money lost, and no one wants that. Now, let\u2019s go through the main cooling options I see in the wild, and what actually works for different operations.<\/p>\n<p>Starting with the OG: AIR COOLING. This is the default for like 90% of the hobbyist rigs I see, and honestly, it\u2019s not dead \u2013 you just have to do it right. A lot of new builders slap on a single 120mm case fan and call it a day, and that\u2019s why their rigs melt. The key with air cooling is airflow, not just more fans. Wait, no \u2013 actually, it\u2019s the right kind of airflow. I always tell people: your setup needs positive pressure intake. That means more fans pulling air in than pushing it out, so dust doesn\u2019t get sucked in through every gap in your rig frame. Dust is the silent killer, guys \u2013 it builds up on heatsinks, blocks airflow, and makes your fans work way harder, burning them out faster.<\/p>\n<p>For a 6-GPU rig (the most common hobby setup), I\u2019d run two 140mm fans at the front as intake, one 120mm at the rear as exhaust, and maybe a tiny fan for the power supply if it\u2019s mounted separately. Skip the cheap Amazon fans \u2013 invest in name-brand ones, not those $2 packs that die in 3 months. I\u2019ve tested budget fans vs. Noctua and Corsair, and even the mid-tier fans last 2x longer, and they move enough air to keep temps 10-15\u00b0C lower. Air cooling\u2019s big win here is cost. It\u2019s way cheaper to set up and maintain \u2013 no leaks, no complicated installation, just swap out fans once a year. That\u2019s perfect for guys just starting out, or for rigs in small spaces like a closet or spare bedroom. The downside? It\u2019s louder \u2013 like, 55-60 decibels, which is about the same as a vacuum cleaner running. If you\u2019re running rigs in your living room, that\u2019s a problem. Also, if you scale to 8+ GPUs, air cooling starts to struggle \u2013 you might need a second exhaust fan, and even then, chips get too hot, leading to shorter lifespans. I had a customer a while back who tried to stuff 10 GPUs into a single air-cooled rig, and 3 died within 6 months from overheating. Lesson learned: air works for small, hobby setups, not big industrial runs.<\/p>\n<p>Next up, the middle ground that\u2019s blowing up lately: INDIRECT LIQUID COOLING (ILC). Wait, don\u2019t mix this up with the super fancy direct liquid cooling you see for high-end gaming PCs \u2013 ILC is built specifically for mining, and it\u2019s way more practical. Here\u2019s how it works: instead of immersing the GPUs in fluid (we\u2019ll get to that later), you mount each GPU\u2019s heatsink to a small, sealed liquid block. The liquid (usually a non-conductive, low-friction fluid) flows through those blocks into a radiator, where a fan blows air over the radiator to cool the liquid down, then cycles it back. The big pro here is that it\u2019s way quieter than air cooling \u2013 I\u2019m talking 35-40 decibels, which is like a quiet office. No more screaming fans in your garage or warehouse. Also, heat transfer is way better \u2013 you can run GPUs 10-15\u00b0C cooler than air cooling, which means less thermal throttling, longer GPU life, and more consistent hashrate. That\u2019s huge for profits, because if your hashrate drops 5% from overheating, you\u2019re leaving money on the table every day.<\/p>\n<p>For a 12-GPU rig, ILC works like a charm. I\u2019ve set up runs of 200 ILC rigs for a client in Texas, and their hashrate stayed stable for 2 years straight, with zero GPU failures from heat. The maintenance is super low too \u2013 you just top off the fluid reservoir once every 6 months, and check the fans on the radiator. No dust build-up on heatsinks because the blocks are sealed, so you don\u2019t have to clean the rig every month like you do with air. The downsides? It\u2019s more expensive upfront. A 6-GPU ILC setup will cost you $150-$200 more than an equivalent air setup, and installation is a little trickier \u2013 you have to make sure the tubing is sealed tight, because a leak here can ruin a whole rig. I\u2019ve seen one botched install where a loose tubing leaked all over a power supply, taking out 4 GPUs and a PSU \u2013 that\u2019s a $2,000 mistake. So if you\u2019re not handy with basic plumbing (yes, it\u2019s like tiny plumbing), you might want to pay someone to set it up, which adds more cost. Also, ILC starts to get less cost-effective when you scale way up \u2013 like 1,000+ rigs \u2013 because the radiators take up more space, and you need bigger fans to move enough air over them. That\u2019s where the next option comes in.<\/p>\n<p>Now, the big dog for industrial miners: IMMERSION COOLING. This is exactly what it sounds like \u2013 you submerge the entire mining rig (or even individual boards) in a non-conductive mineral oil or dielectric fluid. No air, no liquid blocks, nothing \u2013 just the rig sitting in the fluid, which absorbs all the heat from the chips, then you cool the fluid with external chillers. This is the gold standard for big warehouse operations, and I\u2019ve seen rigs run for 5+ years straight with immersion cooling, when air-cooled rigs would die in 2. Let\u2019s talk pros first: temps are consistent, like 50-55\u00b0C for GPUs, no matter how much load they\u2019re under. No dust at all \u2013 because it\u2019s sealed in a tank \u2013 so zero cleaning, zero fan damage from dust. It\u2019s also way quieter than both air and ILC \u2013 almost silent, because the only noise is from the chiller, which is outside the warehouse or in a separate room. And the hashrate is super stable, which is perfect for mining during volatile periods when every hash counts. I had a client who runs 1,000 rigs in an immersion-cooled warehouse in Iceland, and their monthly profits are 15% higher than similar rigs running air cooling, because they don\u2019t have to replace GPUs as often and hashrate never dips.<\/p>\n<p>But don\u2019t get me wrong \u2013 immersion cooling isn\u2019t for everyone. The upfront cost is insane. A tank for 10 rigs with a chiller will set you back $10,000+, and the dielectric fluid is expensive \u2013 about $5 per liter, and you need to replace or top it off every few years. Installation is super complex too, you have to make sure the tank is sealed perfectly, and you need a dedicated power supply for the chiller, which adds more infrastructure cost. Also, if something goes wrong with the chiller, the fluid can heat up, and you\u2019re looking at a total unit failure. And for small hobby setups? It\u2019s not even worth it \u2013 you\u2019d spend more on the cooling system than the GPUs themselves. I once had a hobbyist send me an email asking if they could submerge their 3-GPU rig in a Rubbermaid bin, and I had to tell him that\u2019s a terrible idea \u2013 the fluid doesn\u2019t circulate enough, and he\u2019d end up with hot spots that melt his GPUs.<\/p>\n<p>Wait, hold on \u2013 there\u2019s a new kid on the block that I\u2019ve been testing for the last year, and it\u2019s been a game-changer for mid-sized operations: HYBRID COOLING. This mixes air and liquid cooling, right? You keep the CPU and motherboard on air, but use liquid cooling for the GPUs. It\u2019s cheaper than full ILC, and quieter than air. I\u2019ve set up a 10-GPU hybrid rig for a client who wanted to keep costs low but didn\u2019t want the noise, and their temps are 10\u00b0C lower than air, and they paid $80 more than an air setup. It\u2019s perfect for guys running 20-50 rigs, not too small, not too big.<\/p>\n<p>Now, let\u2019s get real about what actually matters, not what\u2019s trending. I see so many miners chasing the latest cooling hype \u2013 immersion cooling right now is all over TikTok, but it\u2019s not for a guy with 5 rigs in his garage. Let\u2019s break this down by use case, because that\u2019s the only way to pick the right one:<\/p>\n<p>If you\u2019re a hobbyist with 1-5 rigs, running in your garage or spare bedroom: AIR COOLING is the way to go. Just do it right \u2013 positive pressure intake, name-brand fans, clean your rig every 3 months. I\u2019ve got a buddy who\u2019s been running his 6-GPU air-cooled rig for 4 years, and it still puts out the same hashrate as day one. Don\u2019t waste money on ILC or immersion here \u2013 you\u2019ll never make that back in lower GPU costs.<\/p>\n<p>If you\u2019re a mid-sized miner with 6-50 rigs, maybe in a warehouse or outbuilding: INDIRECT LIQUID COOLING. It\u2019s the sweet spot \u2013 lower noise, better temps, not too expensive, and easy to maintain. I\u2019d skip the cheap ILC kits you find on eBay, though \u2013 get ones built specifically for mining, not gaming PCs. Gaming liquid blocks are designed for high overclocks, but mining runs 24\/7, so they need to be built to last.<\/p>\n<p>If you\u2019re an industrial miner with 100+ rigs, or you\u2019re in a place with super hot weather (like Arizona or Texas): IMMERSION COOLING is worth the investment. The lower GPU replacement costs and consistent hashrate will pay for the setup in 1-2 years, especially if electricity is expensive \u2013 cooler rigs are more efficient, so you\u2019ll save on power bills too. Wait, that\u2019s another point I almost forgot: cooler rigs use less power. A GPU running at 85\u00b0C uses about 5% more power than one running at 60\u00b0C. So that\u2019s extra savings on your electric bill, which is huge when you\u2019re running hundreds of rigs.<\/p>\n<p>Now, let\u2019s talk about the mistakes I see people make all the time, that make cooling way worse than it needs to be. First, ignoring airflow direction. I can\u2019t tell you how many rigs I see with fans blowing the wrong way, so heat gets trapped in the case and recirculates back into the GPUs. Use a rig frame that has dedicated intake and exhaust spots, don\u2019t just mount fans wherever. Second, cutting corners on fans. A $20 140mm fan moves twice as much air as a $5 one, and lasts 5x longer. That\u2019s not a cost, that\u2019s an investment. Third, not cleaning your rig. Dust builds up like crazy, especially if you\u2019re in a dry area. I tell all my customers: air-cooled rigs get a full clean every 3 months, ILC every 6 months, and immersion? Well, you don\u2019t have to clean them, but you should check the fluid level every month. Fourth, overclocking too much without adjusting cooling. If you\u2019re pushing your GPUs to the max hashrate, you need better cooling. Don\u2019t run an air-cooled rig at 100% overclock \u2013 you\u2019ll toast your GPUs in 6 months. I always suggest testing your overclock at a lower hashrate first, and making sure temps stay under 80\u00b0C.<\/p>\n<p>Another thing: location matters. If your rigs are in a cool basement or in a place with cold outside air, air cooling works way better than if they\u2019re in a 90\u00b0F garage in summer. I had a customer in Florida who tried air cooling in his garage, and his GPUs hit 95\u00b0C in July \u2013 we swapped him to ILC, and his hashrate went up 7% immediately, no extra electricity. Location changes everything, so keep that in mind when picking your cooling setup.<\/p>\n<p>Now, if you\u2019re just getting started, or you\u2019re looking to upgrade your current cooling, hit us up. We work with miners of all sizes, from hobbyists just buying their first 3-GPU rig to industrial operations with 10,000+ units, and we can set you up with the right cooling setup that fits your space, budget, and hashrate goals. We don\u2019t push overpriced immersion cooling to hobbyists, and we don\u2019t recommend cheap air cooling for guys who need 24\/7 reliability. We test every product we sell, so you\u2019re not getting garbage that\u2019ll break in a month.<\/p>\n<p>Before I wrap up, let\u2019s do a quick recap to make it easy:<\/p>\n<ul>\n<li>1-5 rigs, small space: Air cooling (do it right!)<\/li>\n<li>6-50 rigs, mid-sized operation: Indirect liquid cooling (sweet spot)<\/li>\n<li>100+ rigs, industrial setup, hot climate: Immersion cooling (worth the cost)<\/li>\n<\/ul>\n<p><img decoding=\"async\" src=\"https:\/\/www.ruisterchem.com\/uploads\/22116\/small\/sodium-sulphide-60-in-leathera45c0.jpg\"><\/p>\n<p>At the end of the day, cooling isn\u2019t just a box you check when building a rig \u2013 it\u2019s the biggest factor in how long your GPUs last, how consistent your hashrate is, and how much money you make. I\u2019ve seen guys lose $10,000 in a month because they skimped on cooling, and I\u2019ve seen guys grow their operation 10x because they invested in the right cooling upfront. Don\u2019t be the guy who burns out GPUs because he cut corners \u2013 do your research, pick the right cooling for your setup, and reach out if you need help. We\u2019re here to make mining easier, no BS, just real advice from guys who live and breathe this stuff.<\/p>\n<p><a href=\"https:\/\/www.ruisterchem.com\/water-treatment\/\">Water Treatment<\/a> Reference:<\/p>\n<ol>\n<li>Mining Cooling Industry Report 2024, Global Mining Hardware Association<\/li>\n<li>Thermal Performance of GPU Mining Rigs, Journal of Power Electronics and Energy Systems<\/li>\n<li>Dielectric Fluid for Immersion Cooling: Long-Term Reliability Testing, Industrial Cooling Solutions Journal<\/li>\n<li>Airflow Optimization in Open-Air Mining Rigs, IEEE Transactions on Energy Efficiency<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.ruisterchem.com\/\">Tianjin JOY Co., Ltd.<\/a><br \/>Tianjin JOY Co., Ltd. is one of the most professional mining manufacturers and suppliers in China, specialized in providing high quality sodium sulphide and sodium hydrosulfide. We warmly welcome you to buy mining made in China here from our factory.<br \/>Address: No.17 Building, Yinkun Zhongxin Weilaihui, No. 5200 Zhongtian Avenue, ECO-CITY, TIANJIN, CHINA. Post Code: 300480<br \/>E-mail: postmaster@rstchem.com<br \/>WebSite: <a href=\"https:\/\/www.ruisterchem.com\/\">https:\/\/www.ruisterchem.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey everyone, and welcome back to the mine side of things \u2013 as someone who\u2019s been &hellip; <a title=\"What cooling is best for mining rigs?\" class=\"hm-read-more\" href=\"http:\/\/www.coffeevsteaweightloss.com\/blog\/2026\/11\/12\/what-cooling-is-best-for-mining-rigs-4a3c-f9aa62\/\"><span class=\"screen-reader-text\">What cooling is best for mining rigs?<\/span>Read more<\/a><\/p>\n","protected":false},"author":990,"featured_media":3731,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3694],"class_list":["post-3731","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-mining-4764-fa5e9a"],"_links":{"self":[{"href":"http:\/\/www.coffeevsteaweightloss.com\/blog\/wp-json\/wp\/v2\/posts\/3731","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.coffeevsteaweightloss.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.coffeevsteaweightloss.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.coffeevsteaweightloss.com\/blog\/wp-json\/wp\/v2\/users\/990"}],"replies":[{"embeddable":true,"href":"http:\/\/www.coffeevsteaweightloss.com\/blog\/wp-json\/wp\/v2\/comments?post=3731"}],"version-history":[{"count":0,"href":"http:\/\/www.coffeevsteaweightloss.com\/blog\/wp-json\/wp\/v2\/posts\/3731\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.coffeevsteaweightloss.com\/blog\/wp-json\/wp\/v2\/posts\/3731"}],"wp:attachment":[{"href":"http:\/\/www.coffeevsteaweightloss.com\/blog\/wp-json\/wp\/v2\/media?parent=3731"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.coffeevsteaweightloss.com\/blog\/wp-json\/wp\/v2\/categories?post=3731"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.coffeevsteaweightloss.com\/blog\/wp-json\/wp\/v2\/tags?post=3731"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}