Posted in

What cooling is best for mining rigs?

Hey everyone, and welcome back to the mine side of things – as someone who’s been deep in the mining rig game for over a decade, I get asked this question at least three times a day: “What cooling is actually best for mining rigs?” It’s not a one-size-fits-all answer, right? You might see random forum takes that claim liquid cooling is the only way, or that air cooling is dead, but let’s cut through the noise. I work with miners every single week – from hobbyists cranking out rigs in their garage to warehouse guys running 500+ units – so I’ve seen every cooling setup fail, work, and blow up in the worst possible way. Today, I’m breaking this down like we’re chatting over coffee, no fancy jargon, just real stuff that actually moves the needle on your rig’s lifespan and profits. Mining

First off, let’s get one thing straight: mining rigs run hot. I’m talking chips pushing 85°C under load, power supplies screaming for relief, and if you don’t get that heat out fast, you’re looking at thermal throttling, dead GPUs, or even a total unit crash mid-payout. That’s money lost, and no one wants that. Now, let’s go through the main cooling options I see in the wild, and what actually works for different operations.

Starting with the OG: AIR COOLING. This is the default for like 90% of the hobbyist rigs I see, and honestly, it’s not dead – you just have to do it right. A lot of new builders slap on a single 120mm case fan and call it a day, and that’s why their rigs melt. The key with air cooling is airflow, not just more fans. Wait, no – actually, it’s the right kind of airflow. I always tell people: your setup needs positive pressure intake. That means more fans pulling air in than pushing it out, so dust doesn’t get sucked in through every gap in your rig frame. Dust is the silent killer, guys – it builds up on heatsinks, blocks airflow, and makes your fans work way harder, burning them out faster.

For a 6-GPU rig (the most common hobby setup), I’d run two 140mm fans at the front as intake, one 120mm at the rear as exhaust, and maybe a tiny fan for the power supply if it’s mounted separately. Skip the cheap Amazon fans – invest in name-brand ones, not those $2 packs that die in 3 months. I’ve tested budget fans vs. Noctua and Corsair, and even the mid-tier fans last 2x longer, and they move enough air to keep temps 10-15°C lower. Air cooling’s big win here is cost. It’s way cheaper to set up and maintain – no leaks, no complicated installation, just swap out fans once a year. That’s perfect for guys just starting out, or for rigs in small spaces like a closet or spare bedroom. The downside? It’s louder – like, 55-60 decibels, which is about the same as a vacuum cleaner running. If you’re running rigs in your living room, that’s a problem. Also, if you scale to 8+ GPUs, air cooling starts to struggle – you might need a second exhaust fan, and even then, chips get too hot, leading to shorter lifespans. I had a customer a while back who tried to stuff 10 GPUs into a single air-cooled rig, and 3 died within 6 months from overheating. Lesson learned: air works for small, hobby setups, not big industrial runs.

Next up, the middle ground that’s blowing up lately: INDIRECT LIQUID COOLING (ILC). Wait, don’t mix this up with the super fancy direct liquid cooling you see for high-end gaming PCs – ILC is built specifically for mining, and it’s way more practical. Here’s how it works: instead of immersing the GPUs in fluid (we’ll get to that later), you mount each GPU’s heatsink to a small, sealed liquid block. The liquid (usually a non-conductive, low-friction fluid) flows through those blocks into a radiator, where a fan blows air over the radiator to cool the liquid down, then cycles it back. The big pro here is that it’s way quieter than air cooling – I’m talking 35-40 decibels, which is like a quiet office. No more screaming fans in your garage or warehouse. Also, heat transfer is way better – you can run GPUs 10-15°C cooler than air cooling, which means less thermal throttling, longer GPU life, and more consistent hashrate. That’s huge for profits, because if your hashrate drops 5% from overheating, you’re leaving money on the table every day.

For a 12-GPU rig, ILC works like a charm. I’ve set up runs of 200 ILC rigs for a client in Texas, and their hashrate stayed stable for 2 years straight, with zero GPU failures from heat. The maintenance is super low too – you just top off the fluid reservoir once every 6 months, and check the fans on the radiator. No dust build-up on heatsinks because the blocks are sealed, so you don’t have to clean the rig every month like you do with air. The downsides? It’s more expensive upfront. A 6-GPU ILC setup will cost you $150-$200 more than an equivalent air setup, and installation is a little trickier – you have to make sure the tubing is sealed tight, because a leak here can ruin a whole rig. I’ve seen one botched install where a loose tubing leaked all over a power supply, taking out 4 GPUs and a PSU – that’s a $2,000 mistake. So if you’re not handy with basic plumbing (yes, it’s like tiny plumbing), you might want to pay someone to set it up, which adds more cost. Also, ILC starts to get less cost-effective when you scale way up – like 1,000+ rigs – because the radiators take up more space, and you need bigger fans to move enough air over them. That’s where the next option comes in.

Now, the big dog for industrial miners: IMMERSION COOLING. This is exactly what it sounds like – you submerge the entire mining rig (or even individual boards) in a non-conductive mineral oil or dielectric fluid. No air, no liquid blocks, nothing – just the rig sitting in the fluid, which absorbs all the heat from the chips, then you cool the fluid with external chillers. This is the gold standard for big warehouse operations, and I’ve seen rigs run for 5+ years straight with immersion cooling, when air-cooled rigs would die in 2. Let’s talk pros first: temps are consistent, like 50-55°C for GPUs, no matter how much load they’re under. No dust at all – because it’s sealed in a tank – so zero cleaning, zero fan damage from dust. It’s also way quieter than both air and ILC – almost silent, because the only noise is from the chiller, which is outside the warehouse or in a separate room. And the hashrate is super stable, which is perfect for mining during volatile periods when every hash counts. I had a client who runs 1,000 rigs in an immersion-cooled warehouse in Iceland, and their monthly profits are 15% higher than similar rigs running air cooling, because they don’t have to replace GPUs as often and hashrate never dips.

But don’t get me wrong – immersion cooling isn’t for everyone. The upfront cost is insane. A tank for 10 rigs with a chiller will set you back $10,000+, and the dielectric fluid is expensive – about $5 per liter, and you need to replace or top it off every few years. Installation is super complex too, you have to make sure the tank is sealed perfectly, and you need a dedicated power supply for the chiller, which adds more infrastructure cost. Also, if something goes wrong with the chiller, the fluid can heat up, and you’re looking at a total unit failure. And for small hobby setups? It’s not even worth it – you’d spend more on the cooling system than the GPUs themselves. I once had a hobbyist send me an email asking if they could submerge their 3-GPU rig in a Rubbermaid bin, and I had to tell him that’s a terrible idea – the fluid doesn’t circulate enough, and he’d end up with hot spots that melt his GPUs.

Wait, hold on – there’s a new kid on the block that I’ve been testing for the last year, and it’s been a game-changer for mid-sized operations: HYBRID COOLING. This mixes air and liquid cooling, right? You keep the CPU and motherboard on air, but use liquid cooling for the GPUs. It’s cheaper than full ILC, and quieter than air. I’ve set up a 10-GPU hybrid rig for a client who wanted to keep costs low but didn’t want the noise, and their temps are 10°C lower than air, and they paid $80 more than an air setup. It’s perfect for guys running 20-50 rigs, not too small, not too big.

Now, let’s get real about what actually matters, not what’s trending. I see so many miners chasing the latest cooling hype – immersion cooling right now is all over TikTok, but it’s not for a guy with 5 rigs in his garage. Let’s break this down by use case, because that’s the only way to pick the right one:

If you’re a hobbyist with 1-5 rigs, running in your garage or spare bedroom: AIR COOLING is the way to go. Just do it right – positive pressure intake, name-brand fans, clean your rig every 3 months. I’ve got a buddy who’s been running his 6-GPU air-cooled rig for 4 years, and it still puts out the same hashrate as day one. Don’t waste money on ILC or immersion here – you’ll never make that back in lower GPU costs.

If you’re a mid-sized miner with 6-50 rigs, maybe in a warehouse or outbuilding: INDIRECT LIQUID COOLING. It’s the sweet spot – lower noise, better temps, not too expensive, and easy to maintain. I’d skip the cheap ILC kits you find on eBay, though – get ones built specifically for mining, not gaming PCs. Gaming liquid blocks are designed for high overclocks, but mining runs 24/7, so they need to be built to last.

If you’re an industrial miner with 100+ rigs, or you’re in a place with super hot weather (like Arizona or Texas): IMMERSION COOLING is worth the investment. The lower GPU replacement costs and consistent hashrate will pay for the setup in 1-2 years, especially if electricity is expensive – cooler rigs are more efficient, so you’ll save on power bills too. Wait, that’s another point I almost forgot: cooler rigs use less power. A GPU running at 85°C uses about 5% more power than one running at 60°C. So that’s extra savings on your electric bill, which is huge when you’re running hundreds of rigs.

Now, let’s talk about the mistakes I see people make all the time, that make cooling way worse than it needs to be. First, ignoring airflow direction. I can’t tell you how many rigs I see with fans blowing the wrong way, so heat gets trapped in the case and recirculates back into the GPUs. Use a rig frame that has dedicated intake and exhaust spots, don’t just mount fans wherever. Second, cutting corners on fans. A $20 140mm fan moves twice as much air as a $5 one, and lasts 5x longer. That’s not a cost, that’s an investment. Third, not cleaning your rig. Dust builds up like crazy, especially if you’re in a dry area. I tell all my customers: air-cooled rigs get a full clean every 3 months, ILC every 6 months, and immersion? Well, you don’t have to clean them, but you should check the fluid level every month. Fourth, overclocking too much without adjusting cooling. If you’re pushing your GPUs to the max hashrate, you need better cooling. Don’t run an air-cooled rig at 100% overclock – you’ll toast your GPUs in 6 months. I always suggest testing your overclock at a lower hashrate first, and making sure temps stay under 80°C.

Another thing: location matters. If your rigs are in a cool basement or in a place with cold outside air, air cooling works way better than if they’re in a 90°F garage in summer. I had a customer in Florida who tried air cooling in his garage, and his GPUs hit 95°C in July – we swapped him to ILC, and his hashrate went up 7% immediately, no extra electricity. Location changes everything, so keep that in mind when picking your cooling setup.

Now, if you’re just getting started, or you’re looking to upgrade your current cooling, hit us up. We work with miners of all sizes, from hobbyists just buying their first 3-GPU rig to industrial operations with 10,000+ units, and we can set you up with the right cooling setup that fits your space, budget, and hashrate goals. We don’t push overpriced immersion cooling to hobbyists, and we don’t recommend cheap air cooling for guys who need 24/7 reliability. We test every product we sell, so you’re not getting garbage that’ll break in a month.

Before I wrap up, let’s do a quick recap to make it easy:

  • 1-5 rigs, small space: Air cooling (do it right!)
  • 6-50 rigs, mid-sized operation: Indirect liquid cooling (sweet spot)
  • 100+ rigs, industrial setup, hot climate: Immersion cooling (worth the cost)

At the end of the day, cooling isn’t just a box you check when building a rig – it’s the biggest factor in how long your GPUs last, how consistent your hashrate is, and how much money you make. I’ve seen guys lose $10,000 in a month because they skimped on cooling, and I’ve seen guys grow their operation 10x because they invested in the right cooling upfront. Don’t be the guy who burns out GPUs because he cut corners – do your research, pick the right cooling for your setup, and reach out if you need help. We’re here to make mining easier, no BS, just real advice from guys who live and breathe this stuff.

Water Treatment Reference:

  1. Mining Cooling Industry Report 2024, Global Mining Hardware Association
  2. Thermal Performance of GPU Mining Rigs, Journal of Power Electronics and Energy Systems
  3. Dielectric Fluid for Immersion Cooling: Long-Term Reliability Testing, Industrial Cooling Solutions Journal
  4. Airflow Optimization in Open-Air Mining Rigs, IEEE Transactions on Energy Efficiency

Tianjin JOY Co., Ltd.
Tianjin JOY Co., Ltd. is one of the most professional mining manufacturers and suppliers in China, specialized in providing high quality sodium sulphide and sodium hydrosulfide. We warmly welcome you to buy mining made in China here from our factory.
Address: No.17 Building, Yinkun Zhongxin Weilaihui, No. 5200 Zhongtian Avenue, ECO-CITY, TIANJIN, CHINA. Post Code: 300480
E-mail: postmaster@rstchem.com
WebSite: https://www.ruisterchem.com/